Plenum's Drop Infusion Pump - Imac 304D
|
SPECIFICATIONS:
|
 |
|
|
 |
|
Infusion:
|
Overall Accuracy*:
|
+/- 1% of the selected Drop Rate
|
|
Setting Modes:
|
Flow rate only, flow rate + volume target, time + volume target
|
|
Flow Rate Ranges:
|
300 drops/Min or 0-300 ml/hr
|
|
Infusion Volume limits
|
0-60000 drops or 0-10000 ml
|
|
Time range
|
0-99:59 hrs
|
|
KVO rate
|
1 to 5 % of selected infusions rate but min. 1drop/min or 1ml/hr
|
Mechanical:
|
Pumping Mechanism:
|
Linear Peristaltic
|
|
Drop Sensor
|
External
|
|
Air Bubble Detector**
|
Ultrasonic Adjustable 50-150ml
|
|
Set Type
|
16, 17, 20, 60 drops/cc, Facility to add four customizable sets as per user’s choice
|
Indicators & Alarms:
|
Audio Visual Alarms
|
No Mains, Very low battery, Low battery, Sensor error, Low flow, High flow, Door open, Near End, End of infusion, KVO, Air in line**, System error
|
|
Indicators
|
Run & Mains
|
Special Features:
|
Free Flow Protection
|
A unique lever mechanism protects from free flow in case of accidental door opening
|
|
Digital Processing of Drop Sensor Signal
|
Digital processing or drop sensor signals allows you to the change the infusion parameters without the need for infusion interruption
|
|
Adjustable air in line Alarm threshold**
|
The size of air bubble to be detected can be set in the range of 20 to 150ml
|
|
Flow Rate & Volume Unit Selection
|
Option to select Flow Rate Unit in terms of drop/min or ml/hr & volume Unit in terms of drops or ml
|
Power Supply:
|
External power supply
|
AC Input range 170~ 270 V AC, Frequency 50 ~ 60 Hz, 12 Volts, 1 Amp DC output Supply
|
|
Power Consumption
|
12 Watt max.
|
|
Build in battery
|
: 8.4V, 2.1 Ahr Ni-MH battery for increased durability
|
|
Battery life
|
Continuous operation for about 4.5 hrs. at an operating rate of 20 drops/min or
20 ml/hr with assign I.V. Set under standard conditions
|
Classification:
Operating conditions:
|
Ambient Temperature
|
05 to 40O C
|
|
Relative Humidity
|
20 to 90 % (no condensation)
|
|
Atmospheric Pressure
|
70 to 106 kPa
|
Housing & Construction
|
Housing Material
|
Compact and Robust ABS Plastic
|
|
Weight
|
Approx. 2.4 Kgs
|
|
Dimensions
|
Approx. 250(L) mm, 145(H) mm, 90(W) mm
|
|
Mounting
|
On a pole or a bed-frame
|
* As per IEC Standard 60601-2-24
** Optional feature
Note: Specifications and appearance are subjected to change without prior notice.
|
CONTENTS
